Back Flap Hinges
Listed below are our standard stock sizes, available in mild and stainless steel, ready for immediate despatch.
Back Flap hinges can be supplied without holes (blanks), or if required holes can be pierced, either to our standard patterns, shown below, or to suit your exact requirements.
Other materials and sizes available on request.
E2301
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2301 | 16 | 50 | 0.9 | 2.3 |
Can be supplied blank or with 3.6mm dia holes and countersunk for No.4 screw
E2318
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2318 | 20 | 50 | 1.2 | 3.2 |
Can be supplied blank or with 4.1mm dia holes and countersunk for M3 screw.
E2320
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2320 | 25 | 75 | 1.2 | 3.2 |
Can be supplied blank or with 3.4mm dia holes.
E2332
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2332 | 40 | 80 | 1.2 | 3.2 |
Can be supplied blank or with 4.3mm dia holes and countersunk if required.
E2344
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2344 | 50 | 100 | 1.5 | 4.0 |
Can be supplied blank or with 5.2mm dia holes and countersunk for No.8 screw
E2362
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2362 | 50 | 70 | 2 | 6.35 |
Can be supplied blank, with 6.6mm dia holes or countersunk holes
E2364
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2364 | 50 | 120 | 2.0 | 4.8 |
Can be supplied blank or with 5.5mm dia holes.
E2387
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2387 | 40 | 100 | 3 | 6.35 |
Can be supplied blank or with 5.6mm dia holes.
E2395
| PART NO | LENGTH | WIDTH | THICKNESS | PIN |
|---|---|---|---|---|
| E2395 | 75 | 150 | 3.0 | 6.35 |
Can be supplied blank or with 5.5mm dia holes.
If the size or specification you are looking for is not shown, please call our customer service dept..